Aquacomputer HUBBY7 Internal USB 2.0 Hub

1012926

Nuovo

HUBBY7 è un USB 2.0 hub interno con sette porte, disegnato in modo specifico per consentire il collegamento dei prodotti Aquacomputer USB.

Maggiori dettagli

1 Articolo

In Stock

Nessun punto fedeltà per questo prodotto.


21,50 €

Dettagli

Informazioni prodotto

HUBBY7 è un USB 2.0 hub interno con sette porte, disegnato in modo specifico per consentire il collegamento dei prodotti Aquacomputer USB.

Safety:
Current monitoring of connected devices and automatic shutdown of the hub and error reporting to the operating system in case of overcurrent. Additional thermal monitoring and safety fuse to prevent damage to motherboard and connected devices.

Flexibility:
Power can by supplied to the hub either via USB connection to the motherboard or via SATA power connector. 
If power is supplied via USB, depending on motherboard configuration, power will also be supplied during standby of the PC, therefore enabling connected devices (keyboard, aquaero) to trigger system startup. When using USB power supply, a maximum current of 500 mA is available for the hub and all connected devices in total. 
If power is supplied directly from the PSU via SATA power connector, no power is supplied during standby, which might for example be beneficial to disable computer mice with annoying light emmisions during standby. When using SATA power supply, a total current of 1000 mA is avaailable, split up to a total of 500 mA for ports 1, 2 and 3 combined and ports 4, 5, 6 and 7 combined.

Easy installation:
The hub can be installed raised by 20 mm above the motherboard, the hub is equipped with suitable mounting holes distanced according to ATX specification, spacers and screws are supplied with the hub. Alternatively, the hub can be installed using a self-adhesive hook-and-loop fastening strip also supplied with the hub. 

Dimensions:

  • Approx. 80 x 30 mm, Height 16 mm without cables (ca. 55 mm total incl. cables when installed above motherboard)

Scope of delivery:

  • One USB hub
  • One internal USB cable, total length 25 cm
  • Self-adhesive hook-and-loop fastening strip
  • Mounting material

 

Notice: Because of current limiting features, the hub is not suitable for USB-powered hard drives, CD-ROM drives, mobile phones and similar devices.